You asked: Why does the thread keep getting caught in the bobbin?

Why is my sewing machine jamming underneath?

The reason for the problem could be lint, dust and other debris getting stuck in their mechanism. The solution: Stop work, lift the presser foot and thoroughly clean the fee dogs from any debris. Also, make sure that they are lifted up in a raised position allowing for a proper grip of the fabric.

Why does my bobbin thread keep catching?

Improper Threading

If your sewing machine thread is not properly threaded, the bobbin thread won’t be pulled up into the fabric the way it needs to be. Occasionally the upper thread can catch on a moving part or get stuck, which impedes the easy flow of thread through the needle, creating a tangle.

Why does the thread on my sewing machine knot up under the material?

If the thread has knots, is not smooth, is uneven, or is loose on the bobbin, then it has not been threaded correctly. If your machine uses a bobbin case, follow your sewing machine’s instructions to remove the bobbin from the case and re-thread it. … Be sure that you have the bobbin thread engaged in the bobbin tension.

THIS IS FUN:  What can you do with rainbow yarn?

What tension should my sewing machine be on?

The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.

Why does my thread keep snapping?

There could be several reasons why the upper thread keeps breaking. The upper thread could be installed incorrectly. … Set the tension to the best thread tension setting or less. Make sure the spool of thread is installed correctly using the correct size spool cap for the size of spool.

Why is my Singer sewing machine bunching thread on the bottom?

Thread looping on the underside of the fabric is always an indication that the upper thread is not correctly threaded. This happens when the upper thread is not correctly placed in the tension mechanism and has not been threaded through the take-up lever.

How do you fix bobbin tension?

To tighten your bobbin tension, turn the tiny screw on the bobbin case a smidgen clockwise. To loosen bobbin tension, turn the screw counterclockwise. A quarter turn or less is a good place to start.

What tension should I use for cotton?

Cotton requires a moderate tension setting, usually between three and four.

What is the best stitch length for sewing a straight stitch?

Set the machine for straight stitch, with a stitch length of 3 to 3.5mm. Use a SINGER Topstitching Needle, size 90/14 for medium weight fabrics, or a SINGER Topstitching needle, size 100/16 for heavier fabrics. Sew 1/4″ – 3/8″ from the edge of the fabric.

THIS IS FUN:  What can I knit with tape yarn?