The Stretch Overedge Stitch is a strong stretch stitch that can be used to sew a seam and seam finish simultaneously along the raw edge of the fabric, especially medium to heavyweight stretch knit fabrics. It can be helpful to use an Overedge Foot to help prevent the fabrics from puckering at the edges. SEW IN THE KNOW.
What is a stretch stitch?
A stretch stitch is what you will commonly use if you plan to sew stretch fabric. This stretch stitch is perfectly straight but it allows for stretching without the thread popping or breaking, which is what would happen if stretching a regular straight stitch.
What is elastic overlock stitch?
What is the Overlock Stitch? The overlock stitch is a combination of a straight stitch and a zigzag. It sews backwards and forwards in a straight line, but between every set of straight stitches, it sews a zigzag. If done correctly, this resembles serging, which is how most store-bought clothes are sewn.
When should you use a stretch stitch?
The Straight Stretch Stitch can be used to reinforce seams of sportswear in stretch and non-stretch fabrics, and for curved seams which take a lot of strain. This stitch is stronger than regular straight stitch because it locks three times – forward, backward and forward again.
What needle do you use to sew stretch fabric?
Simple Step #1: Choose a Ballpoint Needle
Stretch fabrics require a ballpoint needle, plain and simple. Other names for this type of needle are stretch needle or jersey needle. The sharp needles that we use for woven fabrics will tear holes in the knit fibers.
Does stretch fabric fray?
One of the super cool things about stretch fabrics is that you often don’t have to finish the edges as they won’t fray (unless it’s a loosely woven sweater type fabric). And if it is a lighterweight knit, like a jersey knit, the edges will curl – which is a cute edge finish itself!
What is the difference between serger and overlock?
A serger and an overlocker are different names for the same machine. … A serger performs an overlocking stitch, which is really more like knitting than sewing. Overlocking, or serging, trims and binds seams so that the fabric can not unravel. It professionally finishes the insides of garments.
Why is my serger stretching my fabric?
This serger is equipped with two sets of feed dogs under the presser foot to move the fabric through the machine. When the differential feed ratio is set at less than 1.0, the front feed dogs move slower than the rear feed dogs, stretching the fabric as it is sewn. …
What is a stretch stitch on a Janome sewing machine?
If your machine has it, use a stretch stitch to allows your sewn seam to stretch with the knit you are sewing. … If your machine doesn’t have a stretch stitch, use a thin, long zigzag stitch or a triple stitch instead to allow the seam to stretch.
Does a zig zag stitch stretch?
A zigzag stitch is a great way to seam knit fabrics. Its inherent stretch allows for the fabric to stretch and move without fear of popping a seam. On light to medium weight knits, try using a stitch length of 1.5 and a width of 5.
Do you backstitch a stretch stitch?
Start stitching about half a centimetre in from the top edge of your fabric. This will prevent the fabric being pulled down into the feed dogs of the machine. … When using the lighting stitch you do not need to backstitch, in fact the settings on most machines will not allow you to backstitch.